COVID-19 Statement: we are operating semi-normally, working from home and fulfilling orders as quickly as possible. Inevitably there will be some delays in our supply chain, and our processing and sending of orders will be slower than normal. We will always advise of any delay immediately on receipt of an order, and are happy to answer any pre-sales questions by phone or email. We thank you for your understanding in these exceptional circumstances.

Oldham DLi - Cordless LED Li-ion Safety Caplamp

Rechargeable cordless LED / lithium ion helmet mounted lamp.

IMPORTANT - ATEX: Oldham products are NOT currently ATEX certified, and are therefore unsuitable for applications where ATEX certification is required. We will update this page when the products are re-certified.

Answering the call for mobility, safety and performance, the Oldham DLi fully integrated cordless caplamp represents a world first with capacity to operate a full 12-hour cycle at peak light intensity, with reserve capacity available in case of emergency or delay underground.

Combining high-performance lithium-ion cells and the very latest in LED technology within a rugged impact-resistant, water and dust resistant compact housing, the low-weight Oldham DLi cordless caplamp is ideal for mining, underground, tunnelling and personal lighting applications.

Previous product code: M263051
SKU: 200009
Manufacturer: Oldham
£124.20 incl VAT
Product Files
  • Case material: Polycarbonate
  • Lens material: Toughened safety glass
  • Nominal battery voltage / capacity 4.2 volts / 5.6 Ah
  • Main LED rating: 1,500 LUX / 40 lumen 90% across 4° arc / 10% across 120° arc
  • Auxiliary LED rating: 5 lumen across 120° arc
  • Main LED duration: 12 hours +4 hours emergency reserve performance
  • Auxiliary LED duration: > 120 hours
  • Main & auxiliary LED lifespan: 30,000 hours
  • Battery life: >1,000 cycles
  • Protection IP 54
  • Dimensions 45 x 65 x 75mm
  • Total weight 225g
  • On/off lighting programme switch: 1 pilot / 2 full power / 3 Boost lighting / 4 off
  • Automatic drop-down to single main LED “power save” setting at low battery voltage
  • Twin LED for spot-focus / wide-angle peripheral lighting and pilot/emergency lighting
  • 40+ lumen light intensity over 4.5 degrees
  • 5+ lumen light intensity over 120 degrees for peripheral vision
  • Provision within the lamp casing for passive TAG communication system
  • Completely maintenance-free design. (key components can be repaired & replaced)
  • Adapter kits to convert existing chargers available in addition to individual charging cradles
  • Conventional single & 10-lamp chargers supported with USB / 12v charger for added versatility
  • Tilting cap-clip to assist variation in helmet design and user preference
Products specifications
Lamp format Cordless (integral battery)
Power supply -
Light modes 3 - Main, Intense (Boost) and Auxiliary (Emergency)
Main LED duration ≥ 12 hours
Auxiliary LED duration ≥ 20 hours
Intense (boost/combined) LED duration -
Main LED output (brightness) 1,500 LUX / 40 lumen 90% across 4° arc / 10% across 120° arc
Auxiliary LED output (brightness) 5 lumen across 120° arc
Intense (boost/combined) LED output (brightness) -
Charging time (recommended charger) 8-10 hours
Charging cycles > 1,000 cycles
Cable length -
Total weight 225g
ATEX certification -
Other certified standards -
IP rating IP54
Working temperature Ta = 0°C – +40°C
Warranty 1 year (2 years optional)