ATEX M1 (Mining) LED Lamps

Rechargeable ATEX M1 rated & certified LED cordless LED / lithium ion helmet mounted lamp.

ATEX M1 Rated & Certified Wisdom Cordless 6A Cap Lamp - 11,000 Lux / 240 Lumens / 13 Hour Run-Time

The Cordless 6A is Wisdom's latest generation cordless lamp and features the mining specific ATEX M1 rating for use in coal and gassy mines. ATEX M1: I M1 Ex ia op is I Ma EN 60079-35-11 b / IECEx: Ex ia op is I Ma IEC 60079-35-1.

The same quality of construction goes into the Wisdom Cordless lamps as the KL series, and the 6A features an extremely tough polycarbonate screen that is much less prone to scratching than cheaper lamps.

The Cordless 6A ATEX M1 will run on full power for 13 hours on a single charge, and must be charged exclusively with the 6.8V version of the NWB-30 smart charger, or, for large scale installations multiple lamp chargers are available.

The Cordless 6A ATEX M1 lamp uses a genuine Cree LED and genuine Panasonic LiIon rechargeable batteries. It provides both an excellent beam - capable of illuminating objects 220m distant - and a good spread of light allowing you to see foreground and distance. The lamp weighs just 169g and is IP68 rated - totally dust tight, protected against prolonged effects of immersion under pressure.

The Cordless 6A ATEX M1 is a fantastic ATEX mining certified and approved working lamp at a very affordable price.

All Wisdom Cordless series lamps supplied by CapLamps.co.uk are pre-fitted with the robust hinging metal clip / bracket - allowing the angle of the lamp to be rotated by 47°.

Rechargeable ATEX M1 mining certified & approved LED / lithium ion helmet mounted lamp.

ATEX M1 Mining Certified & Approved Wisdom KL5M Cap Lamp - 18,000 Lux / 340 Lumens / 13 Hour Run-Time

The Wisdom range of corded miners lamps are designed to withstand the hardships of commercial mining, quarrying and confined space working. The lamps are built to a very high standard, and provide an unrivalled combination of performance and affordability.

The KL5M ATEX M1 lamp will run on full power for 13 hours on a single charge, and can be charged using the using the Wisdom NWB-20 LiIon 'keyway' charger; or, for larger scale installations, on Wisdom rack chargers.

The KL5M ATEX M1 lamp uses a genuine Cree LED and genuine Sanyo LiIon rechargeable batteries. It provides both an excellent beam - capable of illuminating objects 268m distant - and a good spread of light allowing you to see foreground and distance. The lamp weighs just 475g (500g 1.65m cable version) and is IP68 rated - totally dust tight, protected against prolonged effects of immersion under pressure.

ATEX M1 certified for use in hazardous/explosive mining environments and confined spaces. ATEX M1: I M1 ia op is I Ma EN 60079-35-1 / IECEx: Ex ia op is I Ma IEC 60079-35-1.

The KL5M ATEX M1 lamp is a fantastic working lamp at a very affordable price.

Rechargeable ATEX M1 mining certified & approved LED / lithium ion helmet mounted lamp.

ATEX M1 Mining Certified & Approved Wisdom KL8M Cap Lamp - 24,000 Lux / 430 Lumens / 13 Hour Run-Time

The Wisdom range of corded miners lamps are designed to withstand the hardships of commercial mining, quarrying and confined space working. The lamps are built to a very high standard, and provide an unrivalled combination of performance and affordability.

The KL8M ATEX M1 lamp will run on full power for 13 hours on a single charge, and can be charged using the using the Wisdom NWB-20 LiIon 'keyway' charger; or, for larger scale installations, on Wisdom rack chargers.

The KL8M ATEX M1 lamp uses a genuine Cree LED and genuine Sanyo LiIon rechargeable batteries. It provides both an excellent beam - capable of illuminating objects 310m distant - and a good spread of light allowing you to see foreground and distance. The lamp weighs just 525g (550g 1.65m cable version) and is IP68 rated - totally dust tight, protected against prolonged effects of immersion under pressure.

ATEX M1 certified for use in hazardous/explosive mining environments and confined spaces. ATEX M1: I M1 ia op is I Ma EN 60079-35-1 / IECEx: Ex ia op is I Ma IEC 60079-35-1.

The KL8M ATEX M1 lamp is a fantastic working lamp at a very affordable price.

Rechargeable ATEX M1 mining certified & approved LED / lithium ion helmet mounted lamp.

ATEX M1 Mining Certified & Approved Wisdom KL12M Cap Lamp - 28,000 Lux / 512 Lumens / 13 Hour Run-Time

The Wisdom range of corded miners lamps are designed to withstand the hardships of commercial mining, quarrying and confined space working. The lamps are built to a very high standard, and provide an unrivalled combination of performance and affordability.

The KL12M ATEX M1 lamp will run on full power for 13 hours on a single charge, and can be charged using the using the Wisdom NWB-20 LiIon 'keyway' charger; or, for larger scale installations, on Wisdom rack chargers.

The KL12M ATEX M1 lamp uses a genuine Cree LED and genuine Panasonic LiIon rechargeable batteries. It provides both an excellent beam - capable of illuminating objects 335m distant - and a good spread of light allowing you to see foreground and distance. The lamp weighs just 525g (550g 1.65m cable version) and is IP68 rated - totally dust tight, protected against prolonged effects of immersion under pressure.

ATEX M1 certified for use in hazardous/explosive mining environments and confined spaces. ATEX M1: I M1 ia op is I Ma EN 60079-35-1 / IECEx: Ex ia op is I Ma IEC 60079-35-1.

The KL12M ATEX M1 lamp is a fantastic working lamp at a very affordable price.

Looking for a tough and almost indestructible explosion-proof cap lamp?

Introducing the KSE MX series LED cap lamp - a light and bright lamp housed in an extremely tough casing.

Weighing only 150g the lamp has a light output of 145 lumens (195 lumens for three-stage illumination versions) and is ideally suited for harsh environments. Typical applications for the MX series are mining, water treatment / sewer inspection and maintenance, confined space working and the petro-chemical industry.

The MX series is available in two variants; with two-stage illumination (model code ending 00-MX) and with three-stage illumination (model code ending 10-MX). Within those two variants the lamp is offered with different ATEX certifications including M1, Zone 0 and Hydrogen approval. If you need assistance to choose the correct lamp for your requirement then please do not hesitate to contact us.

Charging the MX series is simply a case of inserting the lamp into the charger socket, no twisting or moving parts. The lamp will recharge fully in under 9 hours and the charging status is indicated by an LED on the charger.

All KSE-LIGHTS cap lamps can be worn with different adapter systems on different types of helmets, as well as directly on the head by using a special headband.

Looking for a tough and almost indestructible explosion-proof cap lamp?

Introducing the KSE MX series LED cap lamp - a light and bright lamp housed in an extremely tough casing.

Weighing only 150g the lamp has a light output of 145 lumens (195 lumens for three-stage illumination versions) and is ideally suited for harsh environments. Typical applications for the MX series are mining, water treatment / sewer inspection and maintenance, confined space working and the petro-chemical industry.

The MX series is available in two variants; with two-stage illumination (model code ending 00-MX) and with three-stage illumination (model code ending 10-MX). Within those two variants the lamp is offered with different ATEX certifications including M1, Zone 0 and Hydrogen approval. If you need assistance to choose the correct lamp for your requirement then please do not hesitate to contact us.

Charging the MX series is simply a case of inserting the lamp into the charger socket, no twisting or moving parts. The lamp will recharge fully in under 9 hours and the charging status is indicated by an LED on the charger.

All KSE-LIGHTS cap lamps can be worn with different adapter systems on different types of helmets, as well as directly on the head by using a special headband.

The KSE MC series - the lightest most compact ATEX rated helmet lamps available.

The KSE MC series is a range of rechargeable, explosion-proof cap lamps. Weighing only 145g the lamp is the most compact helmet mounted cap lamp with ATEX certification available. The lamp has a light output of 120 lumens (170 lumens for three-stage illumination versions) and is ideal for a range of industrial applications. The KSE MC series is well proven in mining, waste water management, confined space working, construction, tunnelling and the rescue services.

The MC series is available in two variants; with two-stage illumination (model code ending 00-MC) and with three-stage illumination (model code ending 10-MC). Within those two variants the lamp is offered with different ATEX certifications including M1 and Hydrogen approval. If you need assistance to choose the correct lamp for your requirement then please do not hesitate to contact us.

Charging the MC series is simply a case of inserting the lamp into the charger socket, no twisting or moving parts. The lamp will recharge fully in under 9 hours and the charging status is indicated by an LED on the charger.

All KSE-LIGHTS cap lamps can be worn with different adapter systems on different types of helmets, as well as directly on the head by using a special headband.

The KSE MC series - the lightest most compact ATEX rated helmet lamps available.

The KSE MC series is a range of rechargeable, explosion-proof cap lamps. Weighing only 145g the lamp is the most compact helmet mounted cap lamp with ATEX certification available. The lamp has a light output of 120 lumens (170 lumens for three-stage illumination versions) and is ideal for a range of industrial applications. The KSE MC series is well proven in mining, waste water management, confined space working, construction, tunnelling and the rescue services.

The MC series is available in two variants; with two-stage illumination (model code ending 00-MC) and with three-stage illumination (model code ending 10-MC). Within those two variants the lamp is offered with different ATEX certifications including M1 and Hydrogen approval. If you need assistance to choose the correct lamp for your requirement then please do not hesitate to contact us.

Charging the MC series is simply a case of inserting the lamp into the charger socket, no twisting or moving parts. The lamp will recharge fully in under 9 hours and the charging status is indicated by an LED on the charger.

All KSE-LIGHTS cap lamps can be worn with different adapter systems on different types of helmets, as well as directly on the head by using a special headband.